|
Downgrade Iphone 4 4.3.5 Without SHSH blobs saved (JailBreak para Iphone 4) We showed you before that How to downgrade iOS 4.3.5 to 4.3.3 in General we didn’t put to you if it works on Iphone 4 or 3GS or Ipad 1, 2 but now our reader Ibrahem Aly comment on our previous post that he successfully able to Downgrade iOS 4.3.5 to iOS 4.3.3 on Iphone 4 and see the steps without error. Only tested on an iphone 4 – to successfully downgrade to 4.3.3 from 4.3.5: http://cdn.iphonehowtojailbreak.com/.../downgrade.jpg Downgrade Iphone 4 4.3.5 without saved SHSH blobs Successfully : Required Downloads :
Step 1: You have to go to C:WindowsSystem32driversetc , and replace “HOST” file with the downloaded one in “Restore Files” folder Step 2: Open redsn0w and jailbreak your device but you have to point to iOS 4.3.3 instead of 4.3.4. Step 3: open snowbreeze 2.7.3, choose expert mode, then create pwsd (i think its what is called) allow it to do what it does, then just follow through the on screen instructions. Step 4: it will now be in pwned dfu mode Step 5: snowbreeze will have saved the custom 4.3.3 firmware on the desktop, load up iphone, it will prompt you to restore, on windows press shift and click restore – this will browse to a file of your choice, choose the one on the desktop. Step 6: this will downgrade your iphone through itunes http://www.iphonehowtojailbreak.com/...on_biggrin.gif it will boot up with a fully restored iphone. Step 7: Create a custome 4.3.3 restore with sn0wbreeze 2.7.3 (i went with expert mode and didnt change any options) Step 8: Enter pwned dfu mode through sn0wbreeze Step 9: Run Tiny Umbrella and start the TSS server. Step 10: load iTunes and start the restore process with your custom restore file. Step 11: Now you are on Iphone 4 iOS 4.3.3 and you able now to use JailbreakME 3.0 – UnTethered Jailbreak. YOUR WELCOME! Thanks Ibrahem Aly & Sukhdeep Another Method Similar like above : So I was able to do it on ipod touch 4g and iphone 4, they were both on 4.3.5 without shsh here are the steps. Note: FIRST THING TURN OFF ALL FIREWALLS THIS INCLUDES WINDOWS DEFENDER AND WINDOWS FIREWALL AND INCLUDING ONES YOU HAVE INSTALLED
Step 2: use redsn0w with ipsw 4.3.3 to enter into pwned DFU mode Step 3: make sure you have #74.208.105.171 gs.apple.com #74.208.10.249 gs.apple.com 127.0.0.1 gs.apple.com in your host file located here:- C:WindowsSystem32driversetc Step 4: run tinyumbrella and start TSS Server Step 5: run itunes 10.4.1 and when asked to restore use Shift + restore and point it to the custom ipsw and that should work. ---------- it work for me http://cdn.iphonehowtojailbreak.com/...icon_smile.gif not exactly the same step. Step 1: You have to go to C:WindowsSystem32driversetc , and replace “HOST” file with the downloaded one in “Restore Files” folder Step 2: Open redsn0w and jailbreak your device but you have to point to iOS 4.3.3 instead of 4.3.4. (some time I was not in DFU mode, but you have to be at the end in DFU mode). run again redsn0w and choose reboot Step 3: Create a custome 4.3.3 restore with sn0wbreeze 2.7.3 (i went with expert mode and didnt change any options). stay into sn0wbreeze and press Start. Step 4 : go to itune and restore phone with custom firmware. I have got error 37. after what i have try with apple firmware in itune and have got error 3×94 or 1601, i dont remember. (phone was in DFU mode I thing) Step 5 : Run Tiny Umbrella 5.00.09 and clic on FIX RECOVERY, after what start the TSS server. Step 6 : after what i have try to custom restore (shift+restore) in itune. I have got error with custom firmware and apple firmware. --------- I’ve being testing every single method posted here and many others that I’ve found on the internet. This method posted here (copy below) has a problem on the 5th step. Where it says load up iPhone should be iTunes. That itself already makes people confused. But that’s not all. On step 6 you should be ready to use your device because it says: “this will downgrade your iphone through iTunes (smile) it will boot up with a fully restored iphone” so after that you would be able to play with it, but no, on step 7 it is said to create a new file using sn0wbreeze (“custom 4.3.3″ that you had supposed already created on step 3), enter DFU mode, open Tiny Umbrella and finally restore it through iTunes AGAIN (supposedly done on step 5). Another thing is that on step 2 it says to open redsn0w and jealbreak your device loading the firmware 4.3.3, but if you were able to do that, this post would not be necessary. After this step your phone will stuck on the logo screen (and will stay there forever) when it reboots after the jailbreak process and you will never go to the 3rd step. Sorry, but this post was made by a person that wastes time (doing s**t) and wants to make you waste yours too. “Step 1: You have to go to C:WindowsSystem32driversetc , and replace “HOST” file with the downloaded one in “Restore Files” folder Step 2: Open redsn0w and jailbreak your device but you have to point to iOS 4.3.3 instead of 4.3.4. Step 3: open snowbreeze 2.7.3, choose expert mode, then create pwsd (i think its what is called) allow it to do what it does, then just follow through the on screen instructions. Step 4: it will now be in pwned dfu mode Step 5: snowbreeze will have saved the custom 4.3.3 firmware on the desktop, load up iphone, it will prompt you to restore, on windows press shift and click restore – this will browse to a file of your choice, choose the one on the desktop. Step 6: this will downgrade your iphone through itunes it will boot up with a fully restored iphone. Step 7: Create a custome 4.3.3 restore with sn0wbreeze 2.7.3 (i went with expert mode and didnt change any options) Step 8: Enter pwned dfu mode through sn0wbreeze Step 9: Run Tiny Umbrella and start the TSS server. Step 10: load iTunes and start the restore process with your custom restore file. Step 11: Now you are on Iphone 4 iOS 4.3.3 and you able now to use JailbreakME 3.0 – UnTethered Jailbreak.” |
Respuesta: Downgrade Iphone 4 4.3.5 Without SHSH blobs saved (JailBreak para Iphone 4) Step 1: You have to go to C:\Windows\System32\drivers\etc , and replace "HOST" file with the downloaded one in "Restore Files" folder Step 2: Open redsn0w and jailbreak your device, you can follow this tutorial - Click Here - but you have to point to iOS 4.3.3 instead of 4.3.4. Step 3: Then the iPhone will stop on the recovery mode. Step 4: Open Tinyumbrella (can be found in "Restore Files" folder above), then click on your iPhone name at the left then press on Start Tss Server. Step 5: Open iTunes and restore your iPhone with iOS 4.3.3 firmware (Shift + Restore) then close it. Step 6: You will find error 1013, at this time you have to use Fixrecovery (can be found in "Restore Files" folder above). Step 7: Open iFaith (can be found in "Restore Files" folder above) and Save shsh file. Step 8: Open sn0wbreeze (can be found in "Restore Files" folder above) to create custom iOS 4.3.3 firmware and restore with it. Done. Note: We have not had a chance to verify this guide, so if you gonna try it, please feed us back, specially iPad 2 users. |
Fix FaceTime and MMS Problem on iPhone 4 After Jailbreaking with JailbreakMe 2.0 Una vez que se hace el jailbreak molestan ciertas aplicaciones, como el facetime, el youtube, y las notificaciones push, como el whatsapp Fix FaceTime and MMS Problem on iPhone 4 After Jailbreaking with JailbreakMe 2.0 I just found out about this fix from Redmond Pie’s Facebook fanpage and thought I should share it with you all. If you cant wait for JailbreakMe update, here is a quick possible fix for FaceTime and MMS issue on iPhone 4 after jailbreak using JailbreakMe 2.0 (Star). Simply follow the step by step guide below to fix the issue. Step 1: Follow the step by step guide posted here to jailbreak your iPhone 4, 3GS on iOS 4.0.1 / 4.0 using JailbreakMe. Step 2: Once you are done with the jailbreak, start “Cydia” on your iPhone. Step 3: Touch on “Manage” tab on the bottom. Step 4: Now touch on “Sources” as seen in the screenshot below: http://www.redmondpie.com/wp-content...aiPhone411.jpg Step 5: Touch on “Edit”, and then on “Add”. You should now be prompted to enter a url source as seen in the screenshot below. Type “http://iphonedelivery.advinux.com/cydia/” and click on“Add Source”. http://www.redmondpie.com/wp-content...aiPhone421.jpg Cydia will now automatically update your sources by following a series of automated steps. Step 6: After installation is completed. Search for “iPhoneDelivery” in Cydia and install this application. This app apparently fixes both the FaceTime and MMS issue. http://www.redmondpie.com/wp-content...aiPhone431.jpg Let us know how this one goes for you in the comments section below. [Thanks Ran Cohen for the share on Redmond Pie’s Facebook Fanpage] UPDATE 1: JailbreakMe has been updated which has fixed all the problems related to FaceTime and MMS. If you are doing a fresh jailbreak, you will not have any of these issues. Existing users will need to do a “Complete Upgrade” of Cydia followed by a reset of Network Settings. To do this, simply fire up Cydia and let the loading to finish. It will now automatically ask you to update Cydia. Touch on “Complete Upgrade” and reboot the device once it is done. Go to Settings –> General –> Reset –> Reset Network Settings. Reboot the device again. The problem should be fixed now. UPDATE 2: Are you stuck on purple-colored space screen of JailbreakMe? Follow the instructions posted here to fix this problem. You may also like to check out:
http://www.youtube.com/watch?v=XYeleCFhLOs si no puedes ver las imagenes da click aqui: fuente http://www.redmondpie.com/fix-faceti...ilbreakme-2.0/ |
Download Push Doctor to Enable Push Notifications & Fix YouTube Error on iOS 4.3.5 Download Push Doctor to Enable Push Notifications & Fix YouTube Error on iOS 4.3.5 If you have managed to jailbreak your iPhone to iOS 4.3.5 then it should be possible that you are experiencing problems with Push Notifications or having YouTube errors. This is especially true with an hacktivated iPhone. In order to enable Push Notifications and fix the YouTube error, you will need to obtain legitimate activation certs which you can only get by using SAM to activate your iPhone or by installing Push Doctor. http://cdn.jaxov.com/wp-content/uplo...-iOS-4.3.5.jpg For whatever reason you are unable to fix Push Notifications and the YouTube error on your iPhone by using SAM in iOS 4.3.5, then don't fret because you still have the alternate option of using Push Doctor. For the record, we recommend that you use SAM first to fix Push Notifications and YouTube error due to the fact that it provides your device with improved battery life. But in case you have no choice but to use Push Doctor on iOS 4.3.5, we have a step by step guide for you below. Steps to Install Push Doctor to Enable Push Notifications & Fix YouTube Error on iOS 4.3.5:
4. Cydia should now add the Insanelyi repo to its database so give it a few seconds to update. Once the process is complete, we now need to search for Push Doctor by tapping the Search tab below. On the search field, type "Push Doctor" (without quotes). Push Doctor should appear among the search results. http://cdn.jaxov.com/wp-content/uplo...-iOS-4.3.5.jpg5. 5. Now select Push Doctor by tapping it. On the details page, tap Install on the top right of the screen. http://cdn.jaxov.com/wp-content/uplo...tor-1.01-1.jpg 6. Cydia will now install Push Doctor into your iPhone. Once that's done, simply Reboot your iPhone and you should be done. If you want to test and see if Push Notifications works or not, you can download the iPusher app from the App Store. Take note that for iPusher to properly work, you need to make sure that you are connected to a WiFi network. 7. In most cases, installing Push Doctor should also fix the Cannot connect to YouTube error but in case the error is still present, just repeat the first 6 steps and install YouTube Fix #1 after adding the Pushfix repo: http://cydia.pushfix.info. Upon successful installation, reboot your iPhone and hopefully you'll never see the YouTube error again. http://cdn.jaxov.com/wp-content/uplo...-iOS-4.3.5.jpg http://www.youtube.com/watch?v=0VcbVS60dn8 |
How to Activate iPhone 4/3GS on iOS 4.3.5 using SAM? How to Activate iPhone 4/3GS on iOS 4.3.5 using SAM? http://cdn.jaxov.com/wp-content/uplo...ogo-728x90.png 4/3GS on iOS 4.3.5 using SAM? As you all know, the latest version of iOS 4 as of now is iOS 4.3.5. Which is also most likely the final version of iOS 4 until the next version, the iOS 5 reaches the final build and officially released to the public. If you have managed to jailbreak your iPhone 4 or iPhone 3GS, then we highly recommend to install SAM into your iPhone so you can officially activate it through iTunes. Why? Installing SAM will not only fully enable working Push Notifications but it will also help in improving your iPhone's battery life. For your information, SAM tricks iTunes to generate activation packets for your iPhone which are legitimate so that it fully activates even without hacktivation or an official carrier SIM card. http://cdn.jaxov.com/wp-content/uplo...ia-Top-Ten.jpg Steps to Officially Activate iPhone 4/3GS on iOS 4.3.5 Using SAM:
-------- Hey. I was in the same boat, I have a Telus locked iPhone, unlocked with Gevey, trying to use on Rogers. I could do everything but activate facetime, well after 4 days trying (mitime didn't work for me), I figured out a way to get facetime working for FREE. First, get to your desired firmware (I'm running 4.3.3), jailbreak it (may not be necessary, but I jailbroke mine), and ensure it's properly activated and that push is working. Either use a legit sim, or SAM to activate. Then, use the program DISK AID, connect to the root of your iPhone. Navigate to System > Library > Carrier bundles > iPhone > Unknown.bundle Save out the carrier.plist that is in unknown.bundle. Save it to your desktop somewhere you can find it later. Then, navigate to your intended carrier bundle, for example, mine was Rogers, so I went into the Rogers_ca.bundle, copy the carrier.pist from here into the unknown.bundle folder. You have just overwritten the stock unknown carrier plist with the Rogers carrier plist. The reason for this is so that you can use the correct number registration used for facetime activations. Reboot your iPhone. Do the gevey process again. If you can't see the option to edit your "Cellular Data Network" in Settings > General > Network, then it worked. To clarify, it should be missing. So, now you have verified that you are using the Rogers carrier.plist. Go to Settings > Phone > and Turn ON facetime. It will send a text message to the proper Rogers auth number (49988) instead of the UK number the unknown carrier tried to use. You will be authorized! FaceTime works. Congrats. Now.. you could leave it as is, but you might not have wifi tethering support. To enable tethering, reconnect your phone to DISK AID and restore the saved unknown.bundle carrier.plist into the uknown.carrier folder. Reboot. Do Gevey process again. Go to Settings > General > Network > Cellular Data Network, and reset settings. It should clear all APNs Manually re-enter your carrier settings for APN, MMS and Tether. Exit Everything should now be working, Push, Facetime, Cell Data, WiFi Tether. You're welcome! NOTES: This process of swapping the carrier.plist file into the unknown bundle folder should work to enable facetime with any OFFICIAL carrier. You must copy the plists around because editing them is not possible, the plists on iOS 4.x are signed and cannot be changed, but you CAN move them around. |
Respuesta: Downgrade Iphone 4 4.3.5 Without SHSH blobs saved (JailBreak para Iphone 4) Error While Activating Your iPhone with SAM Posted by Tike on May 24, 2011 Tweet Here is a quick tip for those who are getting "The SIM card inserted in this iPhone does not appear to be supported" error while activating their iPhone 4/3GS/3G on iOS 4.x.x using SAM. Thanks to Gti3993 for confirming that the SAMPrefs depends on the original carrier of iPhone, NOT on the ICCID and IMSI of the SIM card. So, with this guide, you can activate your iPhone with ANY unofficial carrier SIM card using SAM. This will also enable fully working Push Notifications and will fix "Cannot Connect to YouTube" error on your iPhone. http://cdn.jaxov.com/wp-content/uplo...-Supported.jpg Steps to Fix SAM: SIM Card Not Does Not Appear to be Supported Error
|
Respuesta: Downgrade Iphone 4 4.3.5 Without SHSH blobs saved (JailBreak para Iphone 4) How To Fix The iPhone SIM Card Not Supported Error http://www.thedailybuggle.com/wp-con...-supported.jpg A couple of months back, I published a guide on activating your iPhone from an unofficial carrier using legitimate activation certificates from iTunes. This is achieved by using a jailbreak package called Subscriber Artificial Module (SAM, for short) which would benefit the user in many ways, since having legitimate activations certificates for your iPhone will not only fix push notifications and YouTube issues, it also improves battery life. SAM is free and works for a lot of people. The SIM card inserted in this iPhone does not appear to be supported A few of our readers have since complained that iTunes refuses to recognize their SIM card since they’ve used SAM. The error they received was “The SIM card inserted in this iPhone does not appear to be supported”. Apparently, they’re not the only ones – this ‘iPhone SIM card not supported’ error has been associated with those who activated their iPhones using SAM for a while now and luckily, there is a fix available. In this article, I’ll explain how to work around iPhone SIM card not supported error when using SAM. iPhone SIM card not supported error http://www.thedailybuggle.com/wp-con...alid_thumb.jpg Before we begin, let me give a brief recap of what the iPhone SIM card not supported error is and why. Some users receive the error “The SIM card inserted in this iPhone does not appear to be supported” while activating their iPhone 4/3GS/3G on iOS 4.x.x with SAM. This error arises because SAMPrefsdepend on the original carrier on of the iPhone, and not on the ICCID or IMSI of the inserter SIM card. Hence, the user needs to follow a slightly different approach towards activation to successfully using SAM. Getting around the ‘iPhone SIM card not supported’ error First, you need to check the Model number of your iPhone. On Springboard, go to Settings >> General >> About and look for Model information. http://www.thedailybuggle.com/wp-con...1339_thumb.png Search for your Model number in Google to find out the official carrier of your iPhone, and hence the network to which the phone is locked. Note down this information. If you haven’t installed SAM on your phone yet, do so by following the guide here. You need to select Revert Lockdown to Stock in SAM’s settings, following which you should see a Stockification Success message. A failure prompt here can result from installing an incorrect version of SAM. http://www.thedailybuggle.com/wp-con...humb_thumb.png Next, navigate to the main configuration panel for SAM (the first settings screen) and tap the Method menu. Select By Bundle Name in here. http://www.thedailybuggle.com/wp-con...1336_thumb.png Tap the SAM button in top left to go back, and tap on the Bundle option. Here, select the correct carrier and region based on your Google search of your iPhone’s model number. http://www.thedailybuggle.com/wp-con...1337_thumb.png In some cases, you may have a SIM ID menu as well, where you’ll be required to choose your SIM ID. Let the first option be the choice here (if it exists, at all). Now, with lockdown reverted to stock and Method and Bundle Name correctly configured, go to More Information in SAM settings and ActivationState should say Unactivated. Connect your iPhone to your PC or Mac and run iTunes. Legitimate activation certificates will be generated for your device, so make sure your computer has an active internet connection at this point. Once the activation process is complete, ActivationState should turn Wildcard Activated. http://www.thedailybuggle.com/wp-con...1338_thumb.png Solving the ‘iPhone SIM card not supported error’ That’s it. The iPhone SIM card not supported error is gone, and your phone is fully activated with genuine activation packets. This means your push notifications are fixed as well as YouTube, and you can make FaceTime calls, too – all this with an improved battery life. You may check that the push notifications are working using the free iPusher app from the App Store. Did this method fix the iPhone SIM card not supported error caused by SAM? Do you know of another method? If you found this article useful, please share it with your friends. |
| La franja horaria es GMT -5. Ahora son las 01:29:35. |
Desarrollado por: vBulletin® Versión 3.8.9
Derechos de Autor ©2000 - 2026, Jelsoft Enterprises Ltd.
DeNunCianDo.CoM ©