Vendo Kit de Refrigeración Lìquida Swiftech [Archivo]

EleKtroFreaK

14-09-2009, 19:09:53

Saludos, en esta ocasión les traigo este poderoso Kit de RL Swiftech compuesto por las siguientes partes:
KIt de Refri Líquida Swiftech Custom
Bomba MCP350
http://img5.imageshack.us/img5/4863/mcp350.gif (http://img5.imageshack.us/i/mcp350.gif/)
Brand Swiftech
Model MCP350

Spec
Type Pump
Pump Dimensions Small Footprint: 2.4" x 2.4" x 1.5"
Pump Noise 24-26 dBA
Tube Dimensions 3/8"

Features
50,000 hours MTBF (Mean Time Between Failure) equivalent to 5 years lifetime.
Superior 12 Volts DC convenience: plugs into the computer power supply
The MCP350™ can be used with full confidence in any MP servers, and high-end workstations.
Superior real world performance thanks to its high pressure characteristics (13ft of head). The MCP350™ is particularly well adapted to the proliferation of daisy-chained liquid cooling devices in a single circuit: Multiple Processors, Chipset, Graphics, and Hard Drives.
Quiet Operation thanks to brushless motor: 24 to 26 dBA
3/8" barb fittings.
No maintenance when used with de-mineralized water, and anti-fungal additives (Our HydrX™ additive is recommended)
Quick installation with adhesive neoprene pad, or permanent installation with screws and grommets.
RPM sensor plugs to 3 pin motherboard fan connectors and reports impeller rotational speed (effective 1-24-05) .

MCP350™ 12 VDC Pump

Technical specifications

Nominal voltage 12 V DC
Operating voltage range 8 to 13.2 VDC
Minimum startup Voltage 9 VDC

Nominal power (@ 12 V) 8.3 to 12 W
Nominal current (@ 12 V) 0.69 to 1 A
Nominal head (@ 12 V) 10.8 ft (3.3 m)
Nominal discharge (@ 12 V) ~ 116 GPH (440 LPH)

Connection size 3/8" barbs (10mm)
Maximum pressure 22 PSI (1.5 BAR)
Temperature range Up to 140°F (60°C)

Electrical connector Molex 4 pin

Weight 7.3 oz (207 gr.)
Our noise measurement (non lab environment) 24 ~ 26 dBA in a quiet room @ 2'
Motor type Electronically commutated, brushless DC, spherical motor
Pump MTBF (Mean Time Between Failures) 50,000 Hours
RPM Signal Single wire on 3 pin connector
RoHS CompliantTiene como año y medio de uso y viene con su depósito de agua ocupan una bahía 5.25"

Radiador Swiftech MCR120-QP

http://img5.imageshack.us/img5/230/0245926383075.jpg (http://img5.imageshack.us/i/0245926383075.jpg/)

Specs Aquí (http://www.swiftnets.com/products/mcr120-qp.asp)

Viene con racores 3/8" soldados, el radiador tiene como año y medio de uso

Radiador Swiftech MCR220-QP

http://img5.imageshack.us/img5/9536/mcr220qp.jpg (http://img5.imageshack.us/i/mcr220qp.jpg/)

Specs Aqui (http://www.swiftnets.com/products/MCR220-QP.asp)

Viene con racores plasticos de 3/8" , el radiador tiene 4 meses de uso

CPU Water Block Apogee GT

http://img5.imageshack.us/img5/5015/apogee.gif (http://img5.imageshack.us/i/apogee.gif/)

Spec aqui (http://www.swiftnets.com/products/apogee.asp)

Sólo lo entrego con tornillos, resortes y Aisladores para 775 no tengo idea si así sirvan para 478, Am2 ó Am3, para i7 se necesita un adaptador adicional para poder usarlo, me ga mantenido mi Q9550 con 1.36v a 4165Mhz con 33°C de Temperatura ambiente en ~40°C entre cores.

Por otro lado adiciono las mangueras que son de 3/8" y los Fans Azules de 120mm 86CFM ~1900RPM son 3

El Kit tiene un valor de $400.000 + Envio + Comisión is aplican

EleKtroFreaK

15-09-2009, 16:26:02

Para los Usuarios de i7 mande a traer de USA el Swiftech AP-GT-CI7 LGA 1366 Bracket for Apogee GT Block

http://img6.imageshack.us/img6/3413/fanswapci7m.jpg (http://img6.imageshack.us/i/fanswapci7m.jpg/)

The Swiftech Apogee GT Waterblock Socket LGA 1366 Plate Kit is built to provide compatibility with Intel® Core® i7, and is fully compliant with the components keep-out specification. This Swiftech Plate Kit is composed of a replacement hold-down plate for the Apogee GT Waterblock, and a motherboard stiffening back-plate needed for all socket 1366 desktop motherboards.

Compatibility:

Swiftech Apogee GT Waterblock w/ Socket LGA 1366

Adaptador LGA1366 para el bloque Apogee GT $60.000 + Envio